Super Glue

BSI Insta-Cure+  Medium Gap Filling Cyanoacrylate Glue - 14ml (1/2oz)Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held...

C-BOND Thick is a high viscosity general purpose instant/cyanoacrylate glue. This glue comes with and anti-clog cap and has a 15-30 second cure time. Provides outstanding adhesion for porous surfaces and large gaps and could be used with a CA...

C-Bond Thin is a low viscosity general purpose instant/cyanoacrylate glue. This glue comes with an anti-clog cap and has a 5-10 second cure time. C-BOND Thin has good penetration for fitting smooth surfaces. It can bond rubber, plastics, metal,...

C-BOND Extra Thin is a very low viscosity general purpose instant/cyanoacrylate glue. This glue comes with an anti-clog cap and has a 2-4 second cure time. It bonds most substrates instantly. C-BOND Extra Thin is appropriate for fitting smooth surfaces...

TAM87139 - Tamiya - TAM Strong CA 3g Tube This CA Cement (Strong) offers greater resistance against impacts compared to conventional CA cements. Ideal for attaching photo-etched parts or parts with small cementing surfaces. Tube features a screw-on cap...

BSI Insta-Cure Super Thin Cyanoacrylate Glue - 14ml (1/2oz) Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held...

1/2oz / 14 grams Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can...

BSI121 - BSI C/A 1/2 oz. Gold Thin Odourless SUPER-GOLD™ Thin and SUPER-GOLD+™ gap filling medium thickness are our odorless foam safe CAs. They are non-frosting and take only 2 or 3 seconds longer to bond compared to Insta-Cure and...

BSI161 - BSI Un-Cure Debonder 1oz UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart...

BSI126 - BSI C/A 1/2 oz. Gold Medium Odourless SUPER-GOLD™ Thin and SUPER-GOLD+™ gap filling medium thickness are our odorless foam safe CAs. They are non-frosting and take only 2 or 3 seconds longer to bond compared to Insta-Cure and...

BSI152 - BSI Insta-Set Accelerator 8 oz. INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is...

TAM87138 - Tamiya TAM CA Accelerator This CA Cement Accelerator enables quicker curing of CA cement. ★Apply the accelerator to one cementing surface and the CA cement to the other. A strong bond will quickly form when the two surfaces are pressed...

TAM87180 - Tamiya TAM Primer for CA Cement This handy primer is tailor-made for situations when you are using Tamiya CA Cement on difficult-to-cement materials such as polypropylene (PP), polyethylene (PE) or polyacetal (POM). ★Also use it if you want to...

CTL_CODE99956212"TAM87101 - Tamiya TAM CA Cement Singles (5pcs)"Packaged single use CA cement in 0.5 Tubes that can be used one at a timeincludes 5 individual tubes

BSI117 - BSI IC2000 Rubber CA Glue 1/2oz / 14 grams IC-2000™ is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black colored CA has added flexibility for the bonding of metals, fiberglass, rubber,...