HP-BS Parts

IWAI6301 - Iwata Eclipse head cap Wrench Compatible with: Iwata Eclipse HP-BCS, BS, CS, SBS, Takumi, Vault Kustom CS Correct-torque spanner for removing the Eclipse head cap. Always use this tool —...

IWAI6031 - Iwata Head Cap (ECL)Compatible with: Iwata Eclipse HP-BCS, BS, CS, SBS, Takumi, Vault Kustom CSOuter head cap that locks the compression-fit nozzle in place on all Eclipse models. Remove...

WAI1202 - Iwata Universal Chuck Nut FOR USE WITH: Custom Micron V2 (Square Trigger):CM-B/SB/C/CP/Takumi   Hi-Line:HP-AH/BH/CH/TH/TH2 High Performance...

IWAI5104 - Iwata Spring - Air Valve HP-BS/SBS/CS Compatible with: Iwata Eclipse HP-BS, HP-CS, HP-SBS Air valve spring that returns the air valve to the closed position when the lever is released...

IWAI6042 - Iwata Eclipse BS/CS/SBS 0.35mm NozzleCompatible with: Iwata Eclipse HP-BS, HP-CS, HP-SBS, TakumiE3 (0.35mm) compression-fit nozzle for BS, CS, SBS, and Takumi models. Seats by friction —...

IWAI6051 - Iwata O-ring Packing Head Eclipse Compatible with: Iwata Eclipse HP-BCS, BS, CS, SBS, Takumi — Hi-Line HP-BH, CH, TH, TH2 O-ring that seals the nozzle seat within the body. Replace if...

IWAI6011 - Iwata Needle Cap (ECL)Compatible with: Iwata Eclipse HP-BCS, HP-BS, HP-CS, HP-SBS, Takumi, Vault Kustom CSNeedle cap that protects the needle tip on all Eclipse models. For close fine-line...

IWAI6191 - Iwata Handle - single cut (ECL)Compatible with: Iwata Eclipse HP-BCS, BS, CS, SBSStandard single-cut handle for Eclipse models. The cutaway slot exposes the needle chuck nut for quick...

IWAi6172 - Iwata Eclipse BS/CS/SBS 0.35mm NeedleCompatible with: Iwata Eclipse HP-BS, HP-CS, HP-SBS0.35mm spring-steel needle for the Eclipse BS, CS, and SBS. Replace if bent, burred, or if the tip...

IWAI6022 - Iwata 0.35 Nozzle Cap ECLCompatible with: Iwata Eclipse HP-BS, HP-CS, HP-SBS, TakumiE3 (0.35mm) nozzle cap for BS, CS, SBS, and Takumi models. Secures the compression-fit nozzle. Replace...