Super Glue

TAPGL2014 - The Army Painter Super Glue Super Glue ("Cyanoacrylate") at its best Medium thickness and high quality Ideal for miniatures, basing and small parts due to its precision tip. Works great for assembling plastic, resin and metal...

BSI107 - BSI Insta-Cure+  Medium Gap Filling Cyanoacrylate Glue 1 oz Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held...

BSI Insta-Cure+  Medium Gap Filling Cyanoacrylate Glue - 14ml (1/2oz)Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held...

C-BOND Thick is a high viscosity general purpose instant/cyanoacrylate glue. This glue comes with and anti-clog cap and has a 15-30 second cure time. Provides outstanding adhesion for porous surfaces and large gaps and could be used with a CA...

C-Bond Thin is a low viscosity general purpose instant/cyanoacrylate glue. This glue comes with an anti-clog cap and has a 5-10 second cure time. C-BOND Thin has good penetration for fitting smooth surfaces. It can bond rubber, plastics, metal,...

C-BOND Extra Thin is a very low viscosity general purpose instant/cyanoacrylate glue. This glue comes with an anti-clog cap and has a 2-4 second cure time. It bonds most substrates instantly. C-BOND Extra Thin is appropriate for fitting smooth surfaces...

TAM87139 - Tamiya - TAM Strong CA 3g Tube This CA Cement (Strong) offers greater resistance against impacts compared to conventional CA cements. Ideal for attaching photo-etched parts or parts with small cementing surfaces. Tube features a screw-on cap...

BSI Insta-Cure Super Thin Cyanoacrylate Glue - 14ml (1/2oz) Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held...

1/2oz / 14 grams Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can...

BSI121 - BSI C/A 1/2 oz. Gold Thin Odourless SUPER-GOLD™ Thin and SUPER-GOLD+™ gap filling medium thickness are our odorless foam safe CAs. They are non-frosting and take only 2 or 3 seconds longer to bond compared to Insta-Cure and...

BSI161 - BSI Un-Cure Super Glue Remover/Debonder UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll...

BSI126 - BSI C/A 1/2 oz. Gold Medium Odourless SUPER-GOLD™ Thin and SUPER-GOLD+™ gap filling medium thickness are our odorless foam safe CAs. They are non-frosting and take only 2 or 3 seconds longer to bond compared to Insta-Cure and...

BSI152 - BSI Insta-Set Accelerator 8 oz. INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to...

TAM87138 - Tamiya TAM CA Accelerator This CA Cement Accelerator enables quicker curing of CA cement. ★Apply the accelerator to one cementing surface and the CA cement to the other. A strong bond will quickly form when the two surfaces are pressed...

TAM87180 - Tamiya TAM Primer for CA Cement This handy primer is tailor-made for situations when you are using Tamiya CA Cement on difficult-to-cement materials such as polypropylene (PP), polyethylene (PE) or polyacetal (POM). ★Also use it if you want to...

TAM87101 - Tamiya TAM CA Cement Singles (5pcs)

BSI117 - BSI IC2000 Rubber CA Glue 1/2oz / 14 grams IC-2000™ is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black colored CA has added flexibility for the bonding of metals, fiberglass, rubber,...