Tools
- Clips & Clamps
- Knives/Blades/Saws
- Tweezers
- Scribing & Engraving Tools
- Pin Vises/Drills/Bits
- Bending Tools
- Cotton Swabs
- Pipettes
- Pliers
- Rigging Thread & Line
- Rulers & Scale Tools
- Tool Sets
- Other
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
BSI101 - BSI Insta-Cure Super Thin Cyanoacrylate Glue
BSI
CAN$7.95BSI Insta-Cure Super Thin Cyanoacrylate Glue - 14ml (1/2oz) Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held...CAN$7.95 -
TAM87038 - Tamiya Extra Thin Cement - 40ml
Tamiya
CAN$6.95Tamiya EXTRA THIN model cement is used to glue together plastic model kits that use polystyrene plastic. No crevice is too small for this flowing adhesive, which was developed to flow into and stick the small spaces between two plastic parts which have...CAN$6.95 -
BSI111 - BSI Maxi-Cure Extra Thick Cyanoacrylate Glue
BSI
CAN$7.951/2oz / 14 grams Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can...CAN$7.95 -
BSI121 - BSI C/A 1/2 oz. Super Gold Thin Odourless
BSI
CAN$15.95BSI121 - BSI C/A 1/2 oz. Gold Thin Odourless SUPER-GOLD™ Thin and SUPER-GOLD+™ gap filling medium thickness are our odorless foam safe CAs. They are non-frosting and take only 2 or 3 seconds longer to bond compared to Insta-Cure and...CAN$15.95 -
BSI161 - BSI Un-Cure Super Glue Remover
BSI
CAN$8.50BSI161 - BSI Un-Cure Super Glue Remover/Debonder UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll...CAN$8.50 -
BSI203 - BSI Two-Part Epoxy - 15 Minute
BSI
CAN$22.95BSI203 - BSI Two-Part Epoxy - 15 Minute MID-CURE™ 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for QUIK-CURE™ in most applications. MID-CURE™ is our most flexible...CAN$22.95 -
BSI126 - BSI C/A 1/2 oz. Super-Gold Medium Odourless
BSI
CAN$16.95BSI126 - BSI C/A 1/2 oz. Gold Medium Odourless SUPER-GOLD™ Thin and SUPER-GOLD+™ gap filling medium thickness are our odorless foam safe CAs. They are non-frosting and take only 2 or 3 seconds longer to bond compared to Insta-Cure and...CAN$16.95 -
BMF002 - Bare Metal Foil Plastic Polish
Bare Metal Foil
CAN$6.95BMF002 - Bare Metal Foil Plastic PolishCAN$6.95 -
NOV32 - Novus 3: Heavy Scratch Remover 2oz
Novus
CAN$9.95Novus 3: Heavy Scratch Remover 2oz (~60ml)CAN$9.95 -
TAM87091 - Tamiya Tamiya Gel-Type CA Glue
Tamiya
CAN$6.95TAM87091 - Tamiya Tamiya Gel-Type CA Glue This gel type cement is easy to control, preventing mishaps such as it flowing into joints or over details where it is not wanted. A brief hardening time allows for last minute adjustments to attachment positions...CAN$6.95 -
BSI152 - BSI Insta-Set Accelerator 8 oz.
BSI
CAN$19.95BSI152 - BSI Insta-Set Accelerator 8 oz. INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to...CAN$19.95 -
BSI205 - BSI Two-Part Epoxy - 30 Minute
BSI
CAN$19.95BSI205 - BSI Two-Part Epoxy - 30 Minute SLOW-CURE™ 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. SLOW-CURE™ can be used for bonding if...CAN$19.95 -
TAM87138 - Tamiya TAM CA Accelerator
Tamiya
CAN$14.95TAM87138 - Tamiya TAM CA Accelerator This CA Cement Accelerator enables quicker curing of CA cement. ★Apply the accelerator to one cementing surface and the CA cement to the other. A strong bond will quickly form when the two surfaces are pressed...CAN$14.95 -
TAM87134 - Tamiya Limonene Cement - Extra Thin
Tamiya
CAN$7.9587134 - Tamiya Limonene Cement - Extra Thin-Tamiya's Limonene cement is non-toxic-Extra thin cement is very useful for plastic model assembly as it can be dripped into areas like small gaps between plastic parts and does not leave marks when dried-The...CAN$7.95 -
TAM87130 - Tamiya TAM Masking Sheets 7x9.5" (5)
Tamiya
CAN$10.95This masking sticker product is ideal for various tasks such as masking off areas on R/C models, static models, and craft creations for painting. Size is 240 x 180 mmCAN$10.95 -
MIIMI-10 - Microscale Micro Liquitape 1 OZ.
Microscale
CAN$6.50MIIMI-10 - Microscale Micro Liquitape 1 OZ.CAN$6.50 -
MIIMI6 - Microscale Micro Weld Plastic Cement
Microscale
CAN$6.95MIIMI6 - Microscale Micro Weld Plastic CementCAN$6.95 -
MIIMI3 - Microscale Micro Flat Clear Acrylic
Microscale
CAN$6.95MIIMI3 - Microscale Micro Flat Clear AcrylicCAN$6.95 -
MIIMI4 - Microscale Micro Gloss Clear Acrylic
Microscale
CAN$6.50MIIMI4 - Microscale Micro Gloss Clear AcrylicCAN$6.50 -
BSI322 - BSI BSI CA Applicator - Fine Tip
BSI
CAN$0.75BSI322 - BSI BSI CA Applicator - Fine TipCA applicator for fine application of glueCAN$0.75