Epoxy

KNE23 - Kneadatite Blue Yellow Epoxy Putty Tape 3.5oz/100g

"CTL_CODE99945830MRHP120 - Mister Hobby Mr.Epoxy Putty Dense Type"/

TAM87052 - Tamiya - Epoxy Putty - Smooth 25g Mix the white putty and light blue hardener for a quality epoxy putty specially formulated to dry with an exceptionally smooth finish. It dries in around 12 hours at room temperature. Contents: 25g.

TAM87051 - Tamiya Epoxy Putty - Quick 25g This putty consists of white putty and a beige hardener, and dries in 5-6 hours at room temperature. Use it for parts you want to set quickly. Contents: 25g.

TAM87136 - Tamiya - TAM Clear Epoxy Resin Gleaming Dioramas or Sweets ReplicasThis clear epoxy resin is ideal for recreating water surfaces in scale model or railroad dioramas. Mix the resin and the hardening agent in a 2:1 ratio, apply, and allow 24...

TAM87145 - Tamiya - Epoxy Putty - Smooth 100g

TAM87143 - Tamiya - Epoxy Putty - Quick 100g This putty consists of white putty and a beige hardener, and dries in 5-6 hours at room temperature. Use it for parts you want to set quickly. ★Contents: 100g

BSI201 - BSI Two-Part Epoxy - 5 Minute- 4.5 oz combined net wt. (128 g)QUIK-CURE™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE™...

BSI203 - BSI Two-Part Epoxy - 15 Minute MID-CURE™ 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for QUIK-CURE™ in most applications. MID-CURE™ is our...

BSI205 - BSI Two-Part Epoxy - 30 Minute SLOW-CURE™ 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. SLOW-CURE™ can be used for bonding if...

TAM87100 - Tamiya Tamiya Epoxy Cement For Stronger CementingThis epoxy cement is perfect for attaching photo-etched and die-cast parts onto scale models. As it takes five minutes to harden, it provides you with ample time to finely adjust attachment...