BSI

BSI 303 - BSI Extra Long Extender TipFor use over your standard BSI #312 topLong extender tips allow the easy application of C/A Glue to your models and projectsCan be cleaned by soaking in acetone

BSI305 - BSI CA Teflon tubeTeflon Tube attachment for your CA glue for hard to reach places, and precise applications

BSI301 - CA extender top (short pack of 6)

BSI151 -BSI Insta-Set Accelerator 60ml

BSI Insta-Cure+  Medium Gap Filling Cyanoacrylate Glue - 14ml (1/2oz)Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is...

BSI321 - BSI 3ml Pipette - disposable plastic pipette, handy for accurately dispensing paint, thinners, and other liquids. Save 10% when you buy 10 or more!

BSI313 - BSI BSI C/A Caps

BSI312 - BSI BSI Replacement Tops Replacement top that is on all of BSI's non-Pocket CAs. Tops can be soaked in acetone overnight to remove any buildup of CA on the inside and outside of the nozzle.

BSI302 - BSI BSI Extra-Fine Extender Tips Extra Fine Extender Tip - #302 For use over the standard #312 top, it allows BSI's thin CAs (Insta-Cure, Insta-Flex and Super-Gold) to be applied a drop at a...

BSI201 - BSI Two-Part Epoxy - 5 Minute- 4.5 oz combined net wt. (128 g)QUIK-CURE™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in...

BSI Insta-Cure Super Thin Cyanoacrylate Glue - 14ml (1/2oz) Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to...

1/2oz / 14 grams Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better...

BSI121 - BSI C/A 1/2 oz. Gold Thin Odourless SUPER-GOLD™ Thin and SUPER-GOLD+™ gap filling medium thickness are our odorless foam safe CAs. They are non-frosting and take only 2 or 3...

BSI161 - BSI Un-Cure Debonder 1oz UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a...

BSI203 - BSI Two-Part Epoxy - 15 Minute MID-CURE™ 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for QUIK-CURE™ in...

BSI126 - BSI C/A 1/2 oz. Gold Medium Odourless SUPER-GOLD™ Thin and SUPER-GOLD+™ gap filling medium thickness are our odorless foam safe CAs. They are non-frosting and take only 2 or 3...

BSI152 - BSI Insta-Set Accelerator 8 oz. INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during...

BSI205 - BSI Two-Part Epoxy - 30 Minute SLOW-CURE™ 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat...

BSI322 - BSI BSI CA Applicator - Fine TipCA applicator for fine application of glue

BSI100 - BSI BSI Residue Remover Works on all surfaces, including: glass, cardboard, plastic, fiberglass and everything else. INSTA-CLEAN™ is ideal for removing price stickers and their...

BSI117 - BSI IC2000 Rubber CA Glue 1/2oz / 14 grams IC-2000™ is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black colored CA has added...