Description
DSPPB10 - Dspaie Tungsten Push Broach 1.0mm
Can be used as a chisel or engraver with Dspaie T-TH Holder for Carving Bits or any pin-vise that will accommodate 3.175mm or 1/8 inch.
Related Products
Out of stock
BEIBI100S - Beizzi Rivet Wheel 1.0mm Single
Beizzi
CAN$39.95
Rivet Wheel 1.0mm Single
Ideal for 1/48 and 1/32 scales.
Out of stock
DSPKB-S - Dspiae Tungsten Steel Carving Needle
DSPIAE
MSRP:
CAN$16.95
CAN$15.95
DSPKB-S - Dspiae Tungsten Steel Carving NeedleCarving Needleis made by grinding fully forged tungsten steel. With a high degree of hardness, the tungsten steel ensures sharpness and durability of the...
TAM74051 - Tamiya Fine Pin Vise (0.1-1.0mm)
Tamiya
MSRP:
CAN$15.95
CAN$14.95
74051 - Tamiya Fine Pin Vise (0.1-1.0mm)
odel assembly often calls for the drilling of holes of various sizes and these Fine Pin Vises are the ideal tools for the job. The Fine Pin Vise D is...
HIQSBS10 - HiQ Parts 1.0mm Steel Ball Bearings
HiQ Parts
CAN$12.50
HiQ Parts 1.0mm Steel Ball Bearings - 50pcs
ALBMBT10 - Albion Alloys Micro Brass Tubing 1.0mm
Albion Alloys
MSRP:
CAN$14.95
CAN$9.95
Albion Alloys Micro Brass Tubing 1.0mm x .8mm i.d. x 3pcs
DSPTS-01 - Dspiae Tungsten Steel Triangle Carving Knife
DSPIAE
CAN$25.95
DSPTS-01 - Dspiae Tungsten Steel Triangle Carving Knife
The triangle carving knife is made by grinding fully forged tungsten steel. With a high degree of hardness, the tungsten steel ensures a keen...
DSPGH-10 - Dspiae Tungsten Steel Grinding Head Set
DSPIAE
CAN$21.95
DSPGH-10 - Dspiae Tungsten Steel Grinding Head Set
Out of stock
MTL08009 - Master Tools 40cm Fine Chain (Med. 1.0mm)
Master Tools
CAN$8.95
MTL08009 - Master Tools 40cm Fine Chain (Med. 1.0mm)